Show more
Samathy boosted

I'm always astounded how many great (and weird) talks we get at #emfcamp.

Looking forward to not seeing any of them because I'll be too busy running the event.

emfcamp.org/schedule/2022

A day in modern software development is oft marked with an hour or so trying to figure out why a tool that worked yesterday isnt working today.

Imagine a carpenter having to spend 1/3 of their day repairing their hammer which suddenly broke overnight.

I might eventually re-cut the insole I did do because it is rather shorter in length than it needs to be.

On account of figuring out how best to get it to slide into the shoe *after* I'd been trimming material off. I reckon I could trim less off and still get it to slide in - resulting in slightly stronger shoe and an easier time fitting the skate plate.

But maybe I'll just see how I go and cut a new insole if the need arises.

I managed to cut two alumninium insoles last night, and sand one of them to fit in the shoe.

The hackspace's bandsaw was out of action ( for stupid hackspace reasons that are not "its broken" ) so I ended up using a jigsaw that was worse than the one I have at home, just because I'd gone to the hackspace so goddamn I was gonna hack.

Being able to use the variety of bench sanding tools was, however, very useful.

My main concerns at this stage are:

The shoes fit me and are not oversized. Over sizing is recommended for custom Vans skates to allow for the metal insole. Concerned they might be a bit snug! But, they're soft shoes so I reckon they'll be fine.

The plates are 2 sizes smaller than Sunlite recommends for this size shoe. Made this choice because the wheel base of these seems correct for my feet, but idk what I'm doing honestly.

Most of the bits have arrived for my custom roller skates!

I've got some DC shoes, Sunlite plates and soft Radar wheels.

Not-pictured - a sheet of aluminium to make the insoles from.

I need to grab some bearing spacers before I can build up the wheels.
I'll probably get some better bearings too because the cheap ones I got from a local skate shop don't spin very well.

Using spare toe-stops from my parts bin for now.

Cutting the insoles and fitting the plates at the hackspace tomorrow.

No. Slack channels is a growth only metric.

It only goes up.

Life news for masto crews: I passed my driving test yesterday!

I might not be running a masto server that accepts registrations - but It is very clear by the number of new follows I've had that people are heading on over following the Elon x Twitter news.

Multiple people have suddenly followed me in the last couple of days, its very telling that i immediately assume Twitter has done something terrible recently.
I cant tell that they have.

But still, i might come back to posting stuff here.

I still believe in Mastodon is a semi-solution to social media monopolys, but it still doesnt have quite the critical mass to move me over for content from the people i care about.

I need to start journaling again.

When I was doing it last year, it was a really, really good way of being my own therapist.

Yanno, just working out what I'm thinking/feeling. Telling it to someone. Making it cohesive, rather than just a ball of brain weasels.

Today I discovered that Dunlop/Woods type inner tube valves are secret option C.

My partner has a bike from 1991 with Dunlop tubes. I thought they were Schrader tubes and bought the wrong ones to replace a punctured one πŸ™

Patched the tube instead, bought some Dunlop ones. Lessons learned!

Not really using Facebook really does shut me out of a bunch of communities I'd like to be more involved in.

Events are organised, conversations conducted, but I don't see them because I'm not checking Facebook every day,

Even if I do check Facebook, my feed is so full of absolute garbage ads and sponsored posts, Its hard to see any page/group posts anyway.

Wow, existing feels exhausting this week.

I possibly have got bike wheel/tyre combination that is hard to get inner tubes for.

They're deepish wheels that need ~50+mm presta valve tubes.

But my tyres are 700x35c and it appears to be impossible to get 700x35c tubes with valves longer than 40mm.

Continental make a 'Cross28' tube that is 700x35-47x, presta 60mm which looks like it'd solve my problem. But they're quite difficult to find online.

Later this week:

* Change the disk brake pads ( if they need changing ).
* Re-index gears.
* Try to get that pannier rack bolt out somehow and replace it. Probably requires a Dremel.

I successfully changed my bikes tyres last night!
It wasn't too hard, however:

I bought the wrong inner tubes - My bikes wheels are deepish rims. The valves on the tubes I bought are too short. I used the old tubes.

I got oil on my handlebar tape πŸ™

I sheared a bolt attaching the pannier rack. I was trying to get the rack off to make putting the rear wheel back in easier. Rust is a bother πŸ™„

The rear gears now need re-indexing. Pulling the rear derailleur about ruined it.

Not releasing the Ghost in the Shell ( 2017 ) film OST on it's own is a crime against film OSTs.

Good film. Incredible sound track.

I took my floorboards up and didnt find any buried treasure, or bodies.

Kinda disappointed. Just pipes, cables and bricks down there.

Show more
Mastodon

social.samathy.space is one server in the network